{"product_id":"keramicka-impregnace-ceramic-body-cb0-01-a-30ml","title":"Ceramic impregnation Ceramic Body Cb0.01 30ml","description":"\u003cp class=\"h3 mb-2\"\u003e\u003cspan style=\"background-color: transparent; font-size: 11pt;\"\u003eCeramic Paint Protection with Strong Hydrophobic Effects\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003eCeramic Body Cb0.01 is a ceramic sealant used for long-term protection of painted bodywork surfaces. A very thin protective layer chemically bonds permanently with the surface. Ceramic Body Cb0.01 creates very good droplet clustering properties (lotus effect). Thanks to its Easy-to-Clean properties, the treated surface can be cleaned gently and easily, even with manual washing. The protective layer remains intact even after using acidic and alkaline cleaning agents. The cured ceramic sealant protects the paint much longer against environmental influences such as oxidation, salt, acids, and insects. Ceramic Body Cb0.01 thus significantly contributes to maintaining or increasing the vehicle's value. Its lifespan is 36 months, depending on the load. Ceramic Body Cb0.01 can be applied in two layers. Please follow the washing and maintenance instructions.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e: 1x ceramic body 30ml, 2x Microfiber Application Sponge (9998263), 1x instructions\u003c\/p\u003e\n\u003cp class=\"h3 mb-2\"\u003e\u003cspan style=\"background-color: transparent; font-size: 11pt;\"\u003e\u003cstrong\u003eAreas of Application\u003c\/strong\u003e\u003cbr\u003ePainted surfaces on passenger cars, commercial vehicles, motorcycles, motorhomes, caravans, boats, etc.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"h3 mb-2\" style=\"text-align: justify;\"\u003e\u003cspan style=\"background-color: transparent; font-size: 11pt;\"\u003e\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\n\u003cli\u003eThoroughly clean or wash the vehicle with an alkaline solution before polishing and sealing (e.g., Green Star diluted 1:10, do not use impregnating shampoos). Pre-treat coarse dirt such as tree sap, rust film, tar, etc., with red (Reinigungsknete rot) or blue (Reinigungsknete blau) cleaning clay, Teerwäsche A, or a similar product.\u003c\/li\u003e\n\n\u003cli\u003eHeavily to moderately weathered paints are mechanically pre-treated with a coarse abrasive polish Heavy Cut or a fine abrasive polish Fine Cut, depending on their condition. Detailed application information can be found in the Heavy Cut and Fine Cut product information.\u003c\/li\u003e\n\n\u003cli\u003eSlightly weathered paints and holograms can be removed after polishing with Heavy Cut or Fine Cut using a Micro Cut high-gloss polish and an eccentric polisher. See Micro Cut product information.\u003c\/li\u003e\n\n\u003cli\u003eCompletely remove polish residues with a polishing cloth and a Polish and Sealing Towel.\u003c\/li\u003e\n\n\u003cli\u003eWipe all surfaces with a clean Polish and Sealing Towel soaked in Silicon- \u0026amp; Wachsentferner or Panel Preparation Spray with light pressure and wipe dry with a new Polish and Sealing Towel immediately before drying with the other hand. This is the only way to completely remove surfactants, drying aids, oils contained in polishes, etc., and avoid adhesion problems with Ceramic Body Cb0.01. Caution: For sensitive universal or single-layer paints, Silicon- \u0026amp; Wachsentferner must be diluted 1:4 with water, preferably distilled water, to prevent possible matting.\u003c\/li\u003e\n\n\u003cli\u003eThe paint should now have a scratch- and hologram-free surface under good lighting. After this step, the paint must no longer be touched with palms\/fingers (risk of adhesion problems, use gloves). The surface is now perfectly prepared for Ceramic Body Cb0.01. Page 2 of 3\u003c\/li\u003e\n\n\u003cli\u003eMoisten the application sponge with Ceramic Body Cb0.01 and quickly spread it over the paint, working on individual components. Alternatively, an applicator block and application cloth can also be used. After applying two cross-coats, a thin, compact liquid film must be visible. Allow the product to flash off and then polish with a Coating Towel. The flash-off time depends on the temperature and humidity*. The higher the temperature\/humidity, the shorter the flash-off time. First remove the excess, then polish in circular motions without pressure with a fresh side of the cloth. Check the result for streaks under appropriate lighting.\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\u003cp\u003eExample application in summer in Germany: 20 °C \/ 68 °F\u003cbr\u003e                                                        humidity 43%\u003cbr\u003e                                                        flash-off time 6 minutes.\u003cbr\u003e                                                        consumption depending on vehicle size approx. 15-30 ml \u003cbr\u003e\u003cbr\u003eBefore use, read the hazard warnings on the packaging or outer carton and take appropriate protective measures. Ceramic Body Cb0.01 reacts with moisture. This can cause crystals to form on the edge when the bottle is opened. If these crystals get onto the Application Towel, the treated surface will be scratched. Therefore, the crystals must be wiped off with a cloth before dripping the product onto the Application Towel. For double surface treatment, a drying time of approx. 30 minutes after the first treatment must be observed, depending on temperature and humidity. The coating is weather-resistant only after at least 24 hours. Wash the vehicle for the first time after at least nine days, as only then is the impregnation fully cured. At low ambient temperatures (below 15 °C\/59 °F), the curing time is extended. Nevertheless, bird droppings and insect residues should be removed as quickly as possible during the first nine days.\u003c\/p\u003e\n\u003cp\u003eAfter 24 hours, the application of Spray Sealant S0.02 or Hand Wax W0.01 is recommended to protect the not yet fully cured ceramic sealant. Cleaning agents with pH values below 3 or above 12 should be avoided. An opened bottle can be stored for a maximum of 6 months. Before use, check whether crystallization has occurred in the bottle. To maintain the high-gloss ceramic surface for as long as possible, hand washing is recommended. For alkaline cleaning, use Green Star (dilution 1:10). For neutral washing, use Gentle Snow Foam. For the removal of mineral dirt, deep cleaning with Reactivation Shampoo is recommended. Professional aftercare preserves the properties of the ceramic sealant and minimizes the formation of water spots. Therefore, after washing the vehicle, it is recommended to use Hydro Foam Sealant S0.03 (dilution 1:50 - 1:200) as a wet sealant or Spray Sealant S0.02 as a top sealant. For the exact processing procedure, refer to the product information.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThis product information is for non-binding purposes only. No liability can be derived from it on our part. Please check whether the product is suitable for the intended use. We are available for consultations.\u003c\/p\u003e\n\u003cp class=\"h3 mb-2\" style=\"text-align: justify;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003e\u003cstrong\u003e\u003cspan style=\"background-color: transparent;\"\u003eShort video\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"h3 mb-2\" style=\"text-align: justify;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003e\u003cstrong\u003e\u003cspan style=\"background-color: transparent;\"\u003e\u003ciframe width=\"560\" height=\"314\" src=\"https:\/\/www.youtube.com\/embed\/cMz_sD3MSWY\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"h3 mb-2\" style=\"text-align: justify;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003e__________\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"h3 mb-2\" style=\"text-align: justify;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003e\u003cstrong\u003eSignal word:\u003c\/strong\u003e danger\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 11pt;\"\u003e\u003cstrong\u003eWarning symbols:\u003c\/strong\u003e GHS02, GHS05, GHS07, GHS08\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 11pt;\"\u003e\u003cstrong class=\"\"\u003eStandard hazard statements:\u003cbr\u003e\u003c\/strong\u003e- H226 Flammable liquid and vapor.\u003cbr\u003e- H314 Causes severe skin burns and eye damage.\u003cbr\u003e- H317 May cause an allergic skin reaction.\u003cbr\u003e- H304 May be fatal if swallowed and enters airways.\u003cbr\u003e- H412 Harmful to aquatic life with long lasting effects.\u003cbr\u003e\u003cstrong class=\"\"\u003e\n\u003cbr\u003ePrecautionary statements:\u003cbr\u003e\u003c\/strong\u003e- P210 Keep away from heat\/sparks\/open flames\/hot surfaces. - No smoking.\u003cbr\u003e- P260 Do not breathe dust\/fume\/gas\/mist\/vapors\/spray.\u003cstrong class=\"\"\u003e\n\u003cbr\u003e\u003c\/strong\u003e- P273 Avoid release to the environment.\u003cbr\u003e- P280 Wear protective gloves\/protective clothing\/eye protection\/face protection.\u003cbr\u003e- P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.\u003cbr\u003e- P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water\/shower.\u003cbr\u003e- P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.\u003cbr\u003e- P310 Immediately call a POISON CENTER or doctor.\u003cbr\u003e- P403+P235 Store in a well-ventilated place. Keep cool.\u003cbr\u003e- The mixture does not contain any substance that has an adverse effect on the endocrine system. (less than 0.1%)\u003cbr\u003e\u003cstrong class=\"\"\u003e\n\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"h3 mb-2\" style=\"text-align: justify;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Koch Chemie","offers":[{"title":"Default Title","offer_id":53390401536347,"sku":"4807001","price":2189.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1015\/5950\/1147\/files\/3483_ceramic-body-cb0-01-koch.png?v=1786910352","url":"https:\/\/apexon.cz\/en\/products\/keramicka-impregnace-ceramic-body-cb0-01-a-30ml","provider":"Apexon.cz","version":"1.0","type":"link"}