Active foam, insect remover Koch Vb Vorreiniger B 5 kg

Description: Highly concentrated alkaline solution that creates an intensive foam for washing cars and trucks. Special anti-corrosion inhibitors ensure high material compatibility with sensitive components, such as anodized aluminum. (Does not damage aluminum trims). The surfactants and complexing agents contained in the product dissolve not only road dirt but also insects, bird droppings, and other static dirt in a matter of seconds.

Area of application: VORREINIGER B is suitable for touchless washing of cars and trucks, also for heavily frequented car and truck wash lines, as well as for washing engine chassis, dirt on steel rims, and painted aluminum rims that are resistant to alkalis and for removing copolymer waxes.

Recommendations for use of VORREINIGER B with a foam injector: Cool down the vehicle and rinse with pressurized water using a high-pressure cleaner. Pour the concentrate or diluted solution (1:1 - 1:2) into the foam injector bottle. Foam the vehicle with the foam injector and let the product act for 1 to 2 minutes. Do not let the product dry on the vehicle. Afterward, rinse the vehicle with pressurized water. In case of heavier soiling, wash the vehicle with an Octopus wash sponge or a Vikan brush. Then rinse with pressurized water. Wipe off remaining water with a chamois, a cloth or a Vikan squeegee for glass and paint. You can further treat your vehicle with Protector Wax with nano-preservation (dilution 1:30). After treatment with Protector Wax, your vehicle will achieve an unprecedented shine, dirt will not adhere to the bodywork as much, and subsequent washing will be easier and faster.

Recommendations for use of VORREINIGER B with a Pressure Spray Gun or Pressure Sprayer. Cool down the vehicle and rinse with pressurized water using a high-pressure cleaner. Dilute the product 1:10 - 1:20 and pour it into the prepared spray container. Spray the diluted product onto the vehicle from bottom to top. Let it act for 1 to 2 minutes. Do not let the product dry on the vehicle. In case of heavier soiling, wash the vehicle with an Octopus wash sponge or a Vikan brush. Then rinse with pressurized water. Wipe off remaining water with a chamois, cloth or a Vikan squeegee for glass and paint. You can further treat your vehicle with Protector Wax with nano-preservation (dilution 1:30). After treatment with Protector Wax, your vehicle will achieve an unprecedented shine, dirt will not adhere to the bodywork as much, and subsequent washing will be easier and faster.

Recommended dilution - depending on contamination:
- Pre-cleaning: 1:30 to 1:50.
- Rim cleaning: 1:3 to 1:10.
- De-waxing copolymer waxes: 1:5 to 1:10.
- Self-service high-pressure wash: 1:300. Apply to the entire surface, let it act briefly, and rinse thoroughly with a high-pressure cleaner.

- Class A in accordance with VDA. Maximum exposure time 5 min, maximum concentration when used 1:300. - Class B: Maximum exposure time 1 min, maximum concentration when used 1:30.

CAUTION: Do not use when the vehicle is in direct sunlight or when the painted surface is hot. Do not let it dry.

__________

Signal word: Danger

Hazard pictograms: GHS07, GHS05

Standard hazard statements:
- H290 May be corrosive to metals.
- H315 Causes skin irritation.
- H318 Causes serious eye damage.
- H335 May cause respiratory irritation.

Precautionary statements:
- P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
- P280 Wear protective gloves/protective clothing/eye protection/face protection.
- P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310 Immediately call a POISON CENTER or doctor.
- P390 Absorb spillage to prevent material damage.
- P403+P233 Store in a well-ventilated place. Keep container tightly closed.
- The mixture does not contain any substance that has an adverse effect on the endocrine system. (less than 0.1%)